Yale Electric Hoists

Yale CPM | Yale CPE | Yale CPE Twin | Yale CPS

Yale CPM Electric chain hoist (400v 3Ph 50hz)
Capacities 125 kg - 2,000 kg

The model CPM is a robust, reliable and easy to service unit with a long service life. The whole range is fitted with many standard features that were usually only available as extras. The integral limit switches for the highest and lowest hook positions considerably extend the working life span of the slip clutch, motor and gearbox.

Features

Classification 1 Am. As required the model CPM (with appropriate changes to lifting capacity resp. duty cycle) can also be graded up to the classification 3m. All known domestic and European regulations of the classification according to FEM, ISO or BS are complied with resp. exceeded.
Counters for operating hours and number of starts for advanced operation monitoring.
Main contactor as standard, for increased safety.
2 Year Warranty (excluding wear parts).
Thermal overload protection as standard for the whole range.
Duty cycle 50% ED for single speed.
Electromagnetic, spring pressure brake holds the load safely, even in the event of power failure.
Chain container standard.
Motors according to VDE 0530 protected to IP55, against ingression of dust and water.
Standard operating voltage: Euro-voltage 400V, 50Hz, 3-phase.
Increased operating safety through 48V control voltage (contactor control) and an encapsulated pendant control to IP65.

Yale CPM Electric chain hoist Technical Specifications

Model	Capacily in kg/ chain falls	Chain Dimensions d x t in mm	Lifting Speed		Hoist Motor kW	Motor Rating ED%	Net Weight*			Standard chain container for _m chain
Model	Capacily in kg/ chain falls	Chain Dimensions d x t in mm	Main lift m/min	Fine lift m/min	Hoist Motor kW	Motor Rating ED%	Hook Suspension kg	Push** Travel Trolley kg	Electric Trolley kg	Standard chain container for _m chain

CPM 1-8	125/1	5 x 15	8	-	0,4	50	21	32	41	8
CPMF 1-8	125/1	5 x 15	8	2	0,4/0,1	33/16	24	35	44	8
CPM 1-12	160/1	5 x 15	12	-	0,4	50	21	32	41	8
CPMF 1-12	160/1	5 x 15	12	3	0,4/0,1	33/16	24	35	44	8
CPM 2-8	250/1	5 x 15	8	-	0,4	50	21	32	41	8
CPMF 2-8	250/1	5 x 15	8	2	0,4/0,1	33/16	24	35	44	8
CPM 3-6	320/2	5 x 15	6	-	0,4	50	23	34	43	8
CPMF 3-6	320/2	5 x 15	6	1,5	0,4/0,1	33/16	26	37	46	8
CPM 3-12	320/1	6 x 18	12	-	0,8	50	33	44	53	9
CPMF 3-12	320/1	6 x 18	12	3	0,8/0,2	33/16	41	52	61	9
CPM 5-4	500/2	5 x 15	4	-	0,4	50	23	34	43	8
CPMF 5-4	500/2	5 x 15	4	1	0,4/0,1	33/16	26	37	46	8
CPM 5-8	500/1	6 x 18	8	-	0,8	50	33	44	53	9
CPMF 5-8	500/1	6 x 18	8	2	0,8/0,2	33/16	41	52	61	9
CPM 6-6	630/2	6 x 18	6	-	0,8	50	36	47	56	9
CPMF 6-6	630/2	6 x 18	6	1,5	0,8/0,2	33/16	44	55	64	9
CPM 6-12	630/1	8 x 24	12	-	1,6	50	51	63	78	8
CPMF 6-12	630/1	8 x 24	12	3	1,6/0,4	33/16	62	80	89	8
CPM 10-4	1000/2	6 x 18	4	-	0,8	50	36	47	56	9
CPMF 10-4	1000/2	6 x 18	4	1	0,8/0,2	33/16	44	55	64	9
CPM 10-8	1000/1	8 x 24	8	-	1,6	50	51	63	78	8
CPMF 10-8	1000/1	8 x 24	8	2	1,6/0,4	33/16	62	80	89	8
CPM 12-6	1250/2	8 x 24	6	-	1,6	50	58	76	85	8
CPMF 12-6	1250/2	8 x 24	6	1,5	1,6/0,4	33/16	69	87	96	8
CPM 20-4	2000/2	8 x 24	4	-	1,6	50	58	76	85	8
CPMF 20-4	2000/2	8 x 24	4	1	1,6/0,4	33/16	69	87	96	8

*Weight for standard 3m lift. Other lifting heights available
**For trolleys type A and B: Additional weight for geared trolley (VTG): 2,5kg
***For electric trolley (VTE)with 2 speeds 2,0kg.

Suitable for Model	Capacily kg	Size	Flange Width mm	Curve Radius Min M	Electric Trolleys
Suitable for Model	Capacily kg	Size	Flange Width mm	Curve Radius Min M	Travel Speed m/min at 50 Hz	Travel Motor kW at 50 Hz

from CPM 1-8	1000	A	58-180	0,90	18 or 18/4,5	0,18 or 0,18/0,06
to CPMF 10-4	1000	B	180-300	0,90	18 or 18/4,5	0,18 or 0,18/0,06
from CPM 10-8	2000	A	58-180	1,15	18 or 18/4,5	0,18 or 0,18/0,06
to CPMF 20-4	2000	B	180-300	1,15	18 or 18/4,5	0,18 or 0,18/0,06

Yale CPM Electric chain hoist (110/230v 1Ph 50hz)
Capacities 125 kg - 2,000 kg

Yale CPE Electric chain hoist
Capacities 1,600 - 10,000 kg

The CPE series is a range of high quality products for professional applications. They are highly efficient and engineered for a long working life. The hoists are composed of three main component parts which makes service easy and inexpensive.
The motor is designed for high duty cycles. Motor fitted with a bimetallic thermal protection (useable in connection with optional low voltage control). 400 or 230V, 3-phase, 50Hz, Euro-voltage, resp. 460 or 230V, 3-phase 60Hz Versions with two speed trolley VTEF 400V 50Hz, resp. 460V 60Hz. Motor protected to IP54, Insulation class F
Also available with integral trolley.

Yale CPE Electric chain hoist Technical Specifications

Yale CPE 100-2 Twin Electric chain hoist
Capacity 10,000 kg

The model CPE 100-2 consists of two CPE 50-2 units connected by a framework. Hook suspension, geared or electric trolleys are available. Integral limit switches for highest and lowest hook positions are standard.

Yale CPE 100-2 Twin Electric chain hoist Technical Specifications

Suitable for Model	Capacily kg	Size	Flange Width mm	Curve Radius Min M	Electric Trolleys
Suitable for Model	Capacily kg	Size	Flange Width mm	Curve Radius Min M	Travel Speed m/min at 50 Hz	Travel Motor kW at 50 Hz

from CPM 1-8	1000	A	58-180	0,90	18 or 18/4,5	0,18 or 0,18/0,06
to CPMF 10-4	1000	B	180-300	0,90	18 or 18/4,5	0,18 or 0,18/0,06
from CPM 10-8	2000	A	58-180	1,15	18 or 18/4,5	0,18 or 0,18/0,06
to CPMF 20-4	2000	B	180-300	1,15	18 or 18/4,5	0,18 or 0,18/0,06

Yale CPS Electric chain hoist
Capacity 125 kg

The new model CPS is the smallest and lightest within the family of Yale electric chain hoists. Reliability and compact design make it ideal for numerous applications in the construction industry, service companies and many industrial areas for moving small and medium loads.

Features

Robust aluminium housing, powder coated
The 10-Pockets Load Sheave ensures smooth running pf the chain and minimizes chain wear.
Service Factor (ID) 50%
2 Year Warranty (excluding wear parts).
Classification 1Am, As required the model CPS (with appropriate changes to lifting capacity resp. duty cycle) can also be graded up to higher classification
Thermal overload protection as standard.
Electromagnetic, spring pressure brake holds the load safely, even in the event of power failure.
The overload protection (slip clutch)avoids overloading and extends the lifetime of the hoist.
Motors according to VDE 0530 protected to IP55, against ingression of dust and water.
Motor protected to IP54 against ingression of dust and water.
The standard version come with direct control
Zinc Plated high tensile load chain in accordance with national and international standards

Optional

42V low voltage control
Main contactor for increased operating safety
Manual and powered trolleys
Robust chain container
Stainless steel load chain
Festooned cable systems

	Yale CPS 110/1-4 Electric chain hoist. Hook suspension 110v 1Ph 50hz. Capacity(SWL) 125kg	prices from:- £ 712.00 per unit
	Yale CPS 230/1-4 Electric chain hoist. Hook suspension 230v 1Ph 50hz. Capacity(SWL) 125kg	prices from:- £ 712.00 per unit
	Yale CPS 400/1-4 Electric chain hoist. Hook suspension 400v 3Ph 50hz. Capacity(SWL) 125kg	prices from:- £ 712.00 per unit
	Yale CPS 400/1-10 Electric chain hoist. Hook suspension 400v 3Ph 50hz. Capacity(SWL) 125kg	prices from:- £ 712.00 per unit

Yale CPS Electric chain hoist Technical Specifications

Model	Capacily in kg/ chain falls	Chain Dimensions d x p in mm	Lifting Speed m/min	Hoist Motor kW	Intermittant duty ID in %	Weight	Operating current

CPS 1-4	125/1	4 x 12	4	0,23	50	11,5	230v/1Ph/50Hz
CPS 1-10	125/1	4 x 12	10	0,23	50	11,5	400v/3Ph/50Hz

For further information or to request a quotation please contact
sales@lifting-safety.co.uk

To assist us in responding quickly to your enquiry please always include relevant information on your enquiry such as SWL, Height of Lift and where required Electricity phase.

Thank You